Job Description and Requirements
JOB SUMMARY:
The duties are divided into 3 main phases; Before, During and After welding.
Duties before welding
Verify that the material is in accordance with drawing / WPS,
identified and traced to a test certificate in in suitable condition (free from
damage and contamination)
WPS is approved and available to welders (and inspectors).
Welding equipment is in suitable condition and calibrated as
appropriate.
Weld preparations are in accordance with WPS (and/or drawings).
Identification of welder’s qualification for each WPS to be
used and all welder qualification certificates are valid.
Welding consumables to be used are -as specified by the WPS
stored/controlled as specified by the QC procedure.
Joint fit-ups are in accordance with WPS / drawings, Tack welds
are acceptable per standards, code or WPS.
Weld faces are free from defects, contamination, and damage.
The minimum temperature for Preheat (if required) is in
accordance with WPS.
Duties during welding
Ensure weather conditions are suitable / comply with Code
(conditions will not affect welding) when on-site / field welding.
Welding process must be in accordance with WPS.
Preheat (if required) minimum temperature is being maintained in
accordance with WPS.
Inter-pass temperature maximum temperature is in accordance with
WPS.
Welding consumables are in accordance with WPS and being
controlled as the procedure.
Welding parameters e.g. Current, volts, travel speed are in
accordance with WPS.
Root run is visually acceptable to Code before filling the joint
(for single sided welds).
Gouging / grinding only allowed by an approved method and to good
workmanship standard.
Inter-run cleaning must be at good workmanship standard.
The welder is on the approval register /qualified for the WPS
being used.
Duties after welding
Each weld is marked with the welder’s
identification and is identified in accordance with drawing/weld map.
Ensure welds appearance is suitable for all NDT
(profile, cleanness, etc) and visually inspect welds and sentence in accordance
with Code.
Check to ensure the dimensions are in accordance
with drawing/Code.
Ensure any modifications are included on
as-built drawings.
Ensure all NDT is complete, and reports are
available for records.
Monitor repair work in accordance with the procedure.
Monitor PWHT process (if required) for
compliance with the procedure (check chart record).
Ensure test equipment for Pressure/load test (if
required) is calibrated. Monitor test to ensure compliance with procedure/Code
and ensure reports/records are available.
Ensure all reports/records are completed and
collated as required.
Incoming inspection of FIM material at Fabricator’s place. Ensure
material received as per packing list and advise for damage.
Ensure IRN, QC booklet prior to incoming inspection of FIM
material at site.
Ensure preservation of material at site.
Business
Financial:
Responsible for the completion of tasks in the minimum time and ensures that compliance
to the project requirements
Strategy:
Contribute to comply with Client requirements and Company policy
Methods:
Utilize the ITP to carry
out the day to day activities
Competencies and manning:
Is familiar with the principle of good fabrication practice
Project Execution:
Execute the inspection in accordance with requirements of
Inspection and test plan and Project Quality plan.
Follow-up activities of fabrication & identify what’s coming
& take necessary preventive action.
Colleague:
Work closely with team
members within the discipline to ensure the product is in compliance to the
project requirements
Good team spirits
The
Company:
Reports to the Quality Manager
Work closely with fabrication team to ensure latest information is
available on the ground level (working level).
Management and
Leadership
Strong interpersonal and communication skills
Ability to plan and organize work flow in efficient manner
QUALIFICATIONS/REQUIREMENTS:
Graduate of a recognized university or technology institute with a
bachelor degree or Diploma (3 years regular) in Mechanical / Metallurgy Engineering
discipline.
CSWIP 3.1 / AWS certified welding inspector.
ASNT Level-II in RT, PT, MT, UT
Internal Auditor
EXPERIENCE:
6 years minimum experience in Inspection & Testing, preferably
with Fabrication Company.
SKILLS & COMPETENCIES:
Associates degree or equivalent experience
Experience and ability to use: Microsoft
Office, Autodesk, Hand tools for inspection
Strong written and verbal communication
Ability to read and comply with WPS / PQR.
Ability to carry out Internal fabrication audits to access vendor
management system.
*** تقدم على الرابط التالي : Apply on the following link ***
https://www.akhtaboot.com/en/saudi-arabia/jobs/ad-dammam/120045-Welding-Inspector—-KSA-at-National-Oilwell-Varco